Ion Selective SensorsTL-CU-406
Copper Ion Sensor
Ion Selective Sensors
Copper Ion Sensor
TL-CU-406
PVC membrane ISE copper ion sensor. Range 0–1000 mg/L, IP68, RS485 + 4-20mA output.
Request a QuoteProduct Overview
The TL-CU-406 uses PVC membrane ISE technology to measure copper ion (Cu²⁺) concentration in water. Used for industrial effluent compliance, electroplating wastewater monitoring, and drinking water quality control.
Technical Specifications
| Parameter | Value |
|---|---|
| Measurement Principle | PVC membrane ISE |
| Measuring Range | 0–100.0 mg/L / 0–1000.0 mg/L |
| Accuracy | ±10% FS or ±1 mg/L |
| Resolution | 0.1 mg/L or 0.01 mg/L |
| Working Conditions | 0–40°C, 0–1 Bar |
| Power Supply | 12–24 VDC |
| Connection | 3/4" NPT Thread |
| Signal Output | RS485 Modbus RTU or 4-20mA |
| Calibration | 2-point calibration |
| Protection | IP68 |
| Cable Length | 5m |
| pH Limit | 4–10 pH |
Key Features
- PVC membrane ISE for Cu²⁺ measurement
- Two range options for different applications
- Suitable for electroplating wastewater
- Continuous online monitoring
Typical Applications
Industrial effluent complianceElectroplating wastewaterDrinking water qualityMining wastewater
All Products
pH / ORP SensorConductivity / TDS / Salinity SensorDissolved Oxygen SensorTurbidity SensorChlorine Sensor (Free / Total)Suspended Solids / MLSS SensorSludge Level SensorPotassium Ion SensorFluoride Ion SensorNitrate / Nitrite SensorAmmonia Nitrogen SensorSludge Blanket / Interface SensorCOD SensorBOD SensorBlue-Green Algae SensorChlorophyll SensorTotal Phosphorus AnalyzerTotal Nitrogen AnalyzerColour / Chroma SensorOil-in-Water SensorWater Hardness SensorLiquid Level SensorCopper Ion SensorOzone SensorMulti-Parameter Water Quality Sensor (Full Spectrum)Multi-Parameter Water Quality Sensor (Simulated Spectrum)
Need technical support or a custom specification?
Our team responds within one business day.